Redundancy server slow Cimview update

Hi,

I have Cimplicity 8.2 SIM 27 redundant System.
On project is started, Server 2 Cimview screens navigates is bit slow.(Takes 2 seconds approx. ) for update whereas Server1 Cimview Functions normally.

From server1 to server2, 100 mbps redundund LAN network is there.

Even when Server2 is switched to Master mode, Cimeview is responding slow.

In server2, PTDL_PR process is in "hold", Is this slow response is due to this service?

Apart from it, no Error Log is observed. System log shows redundancy function is working normal.

thanks in Advance for your Inputs.